Montarbo Active Speaker System

There are 3 free pictures in this gallery to download and use for anything, even for comercial intention!
Montarbo W28A Active Speaker

Montarbo W28A – 1200W ( 900 + 300 )

Montarbo® processor controled active speaker system;

  • NEODYMIUM-based custom designed transducers
    – two 15″ neodymium magnet high efficiency woofers for the bass section.
    – innovative 2″ neodymium compression driver with titanium diaphragm
    – 4” voice coil, coupled with a constant directivity horn (60°x40°) for the mid-high section.
  • Cabinet is reinforced with internal steel braces.
  • 2 built-in MosFet class AB power amplifiers with dedicated active processors, featuring independent time constants and operating thresholds that are sensitive to line voltage, limiting any excessive voice coil movement while also drastically diminishing the effects of ‘power compression’
  • Output power:
    900 W continuous (1200 W peak) for low frequencies
    300 W continuous (350 W peak) for high frequencies
  • Active cross-over filter (24 dB/oct Linkwitz-Riley, 900 Hz)
  • Forced cooling provided by a thermostatically controlled low turbolence fan.
  • Montarbo active subwoofer 218SA, with built-in stereo electronic crossover.

Montarbo is registered trademark of Elettronica Montarbo s.r.l. – Bologna (Italy)

The main picture was taken with a FUJIFILM brand camera, model FinePix S5700 S700 on Tuesday 2nd March 2010 by the Robert & Mihaela Vicol photographers.

As basic settings, an exposure time of 10/600 (16.667ms ) was used with aperture f/3.5 and the ISO Speed of the camera was 200. Actual focal length of the lens was 1100/100 (11mm) with unknown lens model (range).

The actual file size is 1.01 MBytes, resolution is 2233px on the horizontal and 1349px on the vertically and the original (or modified) file name is Montarbo-W28A-Active-Speaker_13250_cr.jpg (media type is image/jpeg).

The photo original orientation was portret with an X Resolution DPI equal to 72/1 and Y-Resolution DPI equal to 72/1.
Other camera settings (and APEX value) were the lens aperture 360/100, status of flash equal with 25, shutter speed 600/100 and brightness value 350/100 (11).

Note: It looks like the current size of the image was changed, the original version had the 3072 x 2304 resolution and the original photo orientation it was changed to landscape.

About admin

Free Photos from ALL - Free Image Gallery. All images will be credited to Robert & Mihaela Vicol or to

1 Comment

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.